Bulk Material Handling
Grain Sampler / Grain Sampling
A Leading Manufacturer & Supplier of Grain Samplers & Material Handling Equipment.
As a leading manufacturer & supplier of various automatic sampler models, grain sampling & other material handling equipment, our comprehensive product line exceeds all material handling needs.
A primary cross-cut sampler is most often installed in place of a section of spouting and can be either a 90 or 45 degree model.
As material flows through the grain sampler, a "pelican" type diverter with an opening in the leading edge traverses the stream and extracts a representative sample. The "pelican" remains in the rest position under a seal and out of the material stream until an automatic/manual signal is given to collect another sample.
SAMPLE DIVIDER
A mechanical divider receives the sample by gravity from the primary sampler. It then passes through a continuously oscillating swing valve that reduces the sample and distributes it into a 1, 2, or 3 sample adapter. Excess sample is returned to the material stream. Dividers are manufactured in four models: MD 100, MD 200, MD 300 and the MD 1000. Use is determined by the flow rate, installation and frequency of the samples.
AUTOMATIC CONTROLS
A control panel controls the operation of the primary sampler and mechanical divider. A digital integral timer is used to control the frequency of travel of the "pelican." Panels can be built for individual control or for control of multiple sampling systems.
As material flows through the grain sampler, a "pelican" type diverter with an opening in the leading edge traverses the stream and extracts a representative sample. The "pelican" remains in the rest position under a seal and out of the material stream until an automatic/manual signal is given to collect another sample.
SAMPLE DIVIDER
A mechanical divider receives the sample by gravity from the primary sampler. It then passes through a continuously oscillating swing valve that reduces the sample and distributes it into a 1, 2, or 3 sample adapter. Excess sample is returned to the material stream. Dividers are manufactured in four models: MD 100, MD 200, MD 300 and the MD 1000. Use is determined by the flow rate, installation and frequency of the samples.
AUTOMATIC CONTROLS
A control panel controls the operation of the primary sampler and mechanical divider. A digital integral timer is used to control the frequency of travel of the "pelican." Panels can be built for individual control or for control of multiple sampling systems.
Bulk Material Handling:
Intersystems is an ISO 9001 certified company